View HLMP-C11505_4841921.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent T-13/4 Super Ultra-Bright LED Lamps
Data Sheet
HLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223, HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515, HLMP-C523, HLMP-C615, HLMP-C623
Description These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A slight tint is added to the lens for easy color identification. This lamp has been designed with a 20 mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.
Features * Very high intensity * Exceptional uniformity * Microtint lens for color identification * Consistent viewability All colors: AlGaAs Red High Efficiency Red Yellow Orange Green Emerald Green * 15 and 25 family * Tape and reel options available * Binned for color and intensity Applications * Ideal for backlighting front panels* * Used for lighting switches * Adapted for indoor and outdoor signs
Selection Guide Color DH AS AlGaAs 21/2[1] 15 Standoff Leads No Part Number HLMPC115 C115-O00xx C115-OP0xx C117-OP0xx C123 C123-L00xx C215 C215-M00xx C215-MN0xx C223 C223-L00xx C223-MN0xx C315 C315-L00xx C315-LM0xx C323 C323-K00xx C323-KL0xx C415 C415-M00xx C415-M0D0xx C415-MN0xx C423 C423-L00xx C423-LM0xx C515 C515-L00xx C515-LM0xx C523 C523-J00xx C523-KL0xx C615 C615-G00xx C623 C623-E00xx Luminous Intensity Iv (mcd) Min. Max. 290.0 - 290.0 - 290.0 1000.0 290.0 1000.0 90.2 - 90.2 - 138.0 - 138.0 - 138.0 400.0 90.2 - 90.2 - 138.0 400.0 147.0 - 147.0 - 147.0 424.0 96.2 - 96.2 - 96.2 294.0 138.0 - 138.0 - 138.0 - 138.0 400.0 90.2 - 90.2 - 90.2 276.0 170.0 - 170.0 170.0 490.0 69.8 - 69.8 - 111.7 340.0 17.0 - 17.0 - 6.7 - 6.7 -
25 Red 15
Yes No No
25
No
Yellow
15
No
25
No
Orange
15
No
25
No
Green
15
No
25
No
Emerald Green
15 25
No No
2
Part Numbering System HLMP - C x xx - x x x xx Mechanical Options 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads B2: Right Angle Housing, Even Leads UQ: Ammo Pack, Horizontal Leads Color Bin Options 0: Full Color Bin Distribution D: Color Bins 4 & 5 only Maximum Iv Bin Options 0: Open (No Maximum Limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle & Standoffs Options 15: 15 Degree, without Standoffs 17: 15 Degree, with Standoffs 23: 25 Degree, without Standoffs Color Options 1. AS AlGaAs Red 2. High Efficiency Red 3. Yellow 4. Orange 5. Green 6. Emerald Green Package Options C: T-1 3/4 (5 mm)
3
Package Dimensions
5.00 0.20 (0.197 0.008) 8.71 0.20 (0.343 0.008)
5.00 0.20 (NOTE 1) (0.197 0.008) 8.71 0.20 (0.343 0.008) 1.14 0.20 (0.045 0.008)
12.60 0.18 (0.496 0.007)
1.85 (0.073) MAX. 0.70 (0.028) MAX.
31.60 MIN. (1.244)
1.14 0.20 (0.045 0.008) 1.50 0.15 (0.059 0.006) 0.70 (0.028) MAX.
31.60 MIN. (1.244)
CATHODE LEAD
CATHODE LEAD
1.00 MIN. (0.039)
0.50 0.10 SQ. TYP. (0.020 0.004)
1.00 MIN. (0.039)
0.50 0.10 SQ. TYP. (0.020 0.004)
5.80 0.20 (0.228 0.008) CATHODE FLAT 2.54 0.38 (0.100 0.015)
CATHODE FLAT
5.80 0.20 (0.228 0.008) 2.54 0.38 (0.100 0.015)
NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS.
HLMP-Cx15 and HLMP-Cx23
HLMP-Cx17
Absolute Maximum Ratings at TA = 25C DH AS AlGaAs Red 30 500 5 110 -20 to +100 High Efficiency Red and Orange 30 500 5 110 -55 to +100 -55 to +100 High Performance Green and Emerald Green 30 500 5 110 -20 to +100
Parameter DC Forward Current[1] Transient Forward Current[2] (10 sec Pulse) Reverse Voltage (Ir = 100 A) LED Junction Temperature Operating Temperature Range Storage Temperature Range
Yellow 20 500 5 110
Units mA mA V C C C
Notes: 1. See Figure 5 for maximum current derating vs. ambient temperature. 2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.
4
Electrical Characteristics at TA = 25C Forward Voltage Vf (Volts) @ If = 20 mA Typ. Max. 1.8 2.2 Reverse Breakdown Vr (Volts) @ Ir = 100 A Min. 5 Capacitance C (pF) Vf = 0 f = 1 MHz Typ. 30 Thermal Resistance RJ-PIN (C/W) 210 Speed of Response s (ns) Time Constant e-t/s Typ. 30
Part Number HLMP-C115 HLMP-C117 HLMP-C123 HLMP-C215 HLMP-C223 HLMP-C315 HLMP-C323 HLMP-C415 HLMP-C423 HLMP-C515 HLMP-C523 HLMP-C615 HLMP-C623
1.9 2.1 1.9 2.2 2.2
2.6 2.6 2.6 3.0 3.0
5 5 5 5 5
11 15 4 18 18
210 210 210 210 210
90 90 280 260 260
Optical Characteristics at TA = 25C Luminous Intensity Iv (mcd) @ 20 mA[1] Min. Typ. 290 600 90 138 90 146 96 138 90 170 69 17 6 200 300 170 300 170 300 170 300 170 45 27 Peak Wavelength peak (nm) Typ. 645 Color, Dominant Wavelength d[2] (nm) Typ. 637 Viewing Angle 21/2 (Degrees)[3] Typ. 11 26 17 23 17 25 17 23 20 28 20 28 Luminous Efficacy v (lm/w) 80
Part Number HLMP-C115 HLMP-C117 HLMP-C123 HLMP-C215 HLMP-C315 HLMP-C415 HLMP-C515 HLMP-C615
635 583 600 568 558
626 585 602 570 560
145 500 380 595 656
Notes: 1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 21/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
5
1.0 EMERALD GREEN
ORANGE
TS AlGaAs RED DH As AlGaAs RED
TA = 25 C
RELATIVE INTENSITY
HIGH PERFORMANCE GREEN 0.5 YELLOW
HIGH EFFICIENCY RED
0 500
550
600
650 WAVELENGTH - nm
700
750
Figure 1. Relative intensity vs. wavelength.
HIGH EFFICIENCY RED, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN
300.0 200.0
IF - FORWARD CURRENT - mA
100
50.0 20.0 10.0 5.0 2.0 1.0 0.5 0.2 0.1
TS AlGaAs RED
IF - FORWARD CURRENT - mA
100.0
DH As AlGaAs RED
80
HIGH PERFORMANCE GREEN, EMERALD GREEN HIGH EFFICIENCY RED/ORANGE YELLOW
60
40
20
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0
0
1.0
2.0
3.0
4.0
5.0
VF - FORWARD VOLTAGE - V
VF - FORWARD VOLTAGE - V
Figure 2. Forward current vs. forward voltage (non-resistor lamp).
HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN
5.0
1.6
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
1.0 0.5 0.2 0.1 0.05 0.02 0.01 0.1 0.2 0.5
DH As AlGaAs RED
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
2.0
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30
TS AlGaAs RED
1
2
5
10
20 30 50
IF - DC FORWARD CURRENT - mA
IDC - DC CURRENT PER LED - mA
Figure 3. Relative luminous intensity vs. forward current.
6
DH As AlGaAs RED 1.2
1.3 1.2
HER, ORANGE, YELLOW, HIGH PERFORMANCE GREEN, EMERALD GREEN
YELLOW EMERALD GREEN
PEAK - RELATIVE EFFICIENCY (NORMALIZED AT 20 mA)
1.0
RELATIVE EFFICIENCY (NORMALIZED AT 20 mA)
1.1 1.0 0.9
HIGH PERFORMANCE GREEN HIGH EFFICIENCY RED/ORANGE
0.8 0.6 0.4 0.2 0
0.8 0.7 0.6 0.5 0.4
0
10
20
50
100
200 300
0
10
20
30 40
50
60
70
80
90
IPEAK - PEAK FORWARD CURRENT - mA
IPEAK - PEAK FORWARD CURRENT - mA
Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.
DH As AlGaAs RED 40 35
IF - FORWARD CURRENT - mA
HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 40 35 HER, ORANGE, GREEN, EMERALD GREEN RJA = 470 C/W RJA = 300 C/W 20 YELLOW 15 10 5 0 0 20 RJA = 705 C/W
30 25 20 15 10 5 0 0 20 40 60 80 100 RJA = 559 C/W RJA = 689 C/W
IF - FORWARD CURRENT - mA
30 25
40
60
80
100
TA - AMBIENT TEMPERATURE - C
TA - AMBIENT TEMPERATURE - C
Figure 5. Maximum forward dc current vs. ambient temperature. Derating based on TjMAX = 110C.
1
NORMALIZED LUMINOUS INTENSITY
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45
ANGULAR DISPLACEMENT - DEGREES
Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family.
7
1
NORMALIZED LUMINOUS INTENSITY
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45
ANGULAR DISPLACEMENT - DEGREES
Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family.
Intensity Bin Limits Color Bin L M N O P Q R S T U V W X Y Z L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 173.2 250.0 250.0 360.0 360.0 510.0 510.0 800.0 800.0 1250.0 1250.0 1800.0 1800.0 2900.0 2900.0 4700.0 4700.0 7200.0 7200.0 11700.0 11700.0 18000.0 18000.0 27000.0
Red/Orange
Yellow
8
Intensity Bin Limits, continued Color Bin E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0
Green/ Emerald Green
Maximum tolerance for each bin limit is 18%.
Color Categories Color Category # 6 5 4 3 2 1 3 2 4 5 1 2 3 4 5 6 7 8 Lambda (nm) Min. 561.5 564.5 567.5 570.5 573.5 582.0 584.5 587.0 589.5 592.0 597.0 599.5 602.0 604.5 607.5 610.5 613.5 616.5 Max. 564.5 567.5 570.5 573.5 576.5 584.5 587.0 589.5 592.0 593.0 599.5 602.0 604.5 607.5 610.5 613.5 616.5 619.5
Green
Yellow
Orange
Tolerance for each bin limit is 0.5 nm.
9
Mechanical Option Matrix Mechanical Option Code 00 01 02 B2 UQ Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, minimum increment 1300 pcs/bag Tape & Reel, straight leads, minimum increment 1300 pcs/bag Right Angle Housing, even leads, minimum increment 500 pcs/bag Ammo Pack, horizontal leads, in 1K minimum increment
Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.
10
Precautions Lead Forming * The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering into PC board. * If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to LED package. Otherwise, cut the leads of LED to length after soldering process at room temperature. The solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the LED chip die attach and wirebond. * It is recommended that tooling made to precisely form and cut the leads to length rather than rely upon hand operation. Soldering Conditions * Care must be taken during PCB assembly and soldering process to prevent damage to LED component. * The closest LED is allowed to solder on board is 1.59 mm below the body (encapsulant epoxy) for those parts without standoff. * Recommended soldering conditions: Wave Soldering 105 C Max. 30 sec Max. 250 C Max. 3 sec Max. Manual Solder Dipping - - 260 C Max. 5 sec Max.
* Wave soldering parameter must be set and maintained according to recommended temperature and dwell time in the solder wave. Customer is advised to periodically check on the soldering profile to ensure the soldering profile used is always conforming to recommended soldering condition. * If necessary, use fixture to hold the LED component in proper orientation with respect to the PCB during soldering process. * Proper handling is imperative to avoid excessive thermal stresses to LED components when heated. Therefore, the soldered PCB must be allowed to cool to room temperature, 25C, before handling. * Special attention must be given to board fabrication, solder masking, surface plating and lead holes size and component orientation to assure solderability. * Recommended PC board plated through hole sizes for LED component leads: LED Component Lead Size 0.457 x 0.457 mm (0.018 x 0.018 inch) 0.508 x 0.508 mm (0.020 x 0.020 inch) Diagonal 0.646 mm (0.025 inch) 0.718 mm (0.028 inch) Plated Through Hole Diameter 0.976 to 1.078 mm (0.038 to 0.042 inch) 1.049 to 1.150 mm (0.041 to 0.045 inch)
Pre-heat Temperature Pre-heat Time Peak Temperature Dwell Time
Note: Refer to application note AN1027 for more information on soldering LED components.
TURBULENT WAVE
250
TEMPERATURE - C
LAMINAR WAVE HOT AIR KNIFE
BOTTOM SIDE OF PC BOARD TOP SIDE OF PC BOARD
200 150
FLUXING CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150C (100C PCB) SOLDER WAVE TEMPERATURE = 245C AIR KNIFE AIR TEMPERATURE = 390C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40 SOLDER: SN63; FLUX: RMA NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE.
100 50 30 0 10
PREHEAT
20
30
40
50
60
70
80
90
100
TIME - SECONDS
Figure 8. Recommended wave soldering profile.
11
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2004-2005 Agilent Technologies, Inc. Obsoletes 5988-2149EN November 12, 2005 5989-4251EN

▲Up To Search▲

Price & Availability of HLMP-C11505

	To Download HLMP-C11505 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .